|
Product Specification:
| Grade |
CHEMICAL COMPOSITION(max,%) |
|
| Total carbon |
Free carbon |
Impurities(max,%) |
|
| |
| Fe |
Si |
Al |
O |
N |
Na |
K |
Ca |
|
| LF-NbC |
≥11.1 |
≤0.15 |
0.05 |
0.01 |
0.01 |
0.30 |
0.02 |
0.005 |
0.005 |
0.01 |
|
| Particle size:0.5-500micron , can be as requested. |
|
| Niobium carbide |
| Identifiers |
| CAS number |
12069-94-2 |
| Properties |
| Molecular formula |
NbC |
| Molar mass |
104.917 g/mol |
| Density |
7.820 g/cm3 |
| Melting point |
3,490 °C (6,310 °F; 3,760 K) |
| Structure |
| Crystal structure |
Cubic, cF8 |
| NbC introduction |
Niobium carbide is a frequent intentional product in microalloyed steels due to its
extremely low solubility product in austenite, the lowest of all the refractory metal
carbides. This means that micrometre-sized precipitates of NbC are virtually
insoluble in steels at all processing
temperatures and their location at grain boundaries helps prevent excessive
grain growth in these steels. This is of enormous benefit, and the cornerstone
of microalloyed steels, because it is their uniform, very fine grain size that ensures
both toughness and strength. The only commonly occurring compound with a
lower solubility and hence, greater potential for restricting the grain growth of
steels is titanium nitride. |
NbC
Application: |
a) Niobium carbide is a frequent intentional product in microalloyed steels due
to its extremely low solubility product in austenite, the lowest of all the
refractory metal carbides
b) Niobium carbide has an extremely low solubility product in austenite.
When niobium carbide is added by micrometre-sized precipitates, it is
virtually insoluble in steels at all temperatures. Niobium carbide's location
at ground boundaries prevents excessive grain growth.
c) Niobium has many medical research applications. It is also alloyed to
produce arc-welding rods and in corrosion-resistant steel.
Niobium carbide is an extremely hard, corrosion resistant refractory ceramic.
It is a brown gray metallic power with purple lustre. |
| main products of LFJS |
1.Powdered materials including Chromium Carbide Cr3C2 , Hafnium Carbide HfC,
Molybdenum Carbide Mo2C, Niobium Carbide NbC, Tantalum Carbide Tac,
Titanium Carbide TiC, Vanadium Carbide VC, Zirconium Carbide ZrC,
Titanium Carbide Nitrides Ti (C,N);
(suitable for plasma coating, thermal spray coating, cold spray,additive in
cutting tools,CVD,PCB,3D printing,abrasive materials,MIM,powder metallurgy,etc)
2.compound carbide powder: (Ta,Nb)C,(W,Ti)C , (W,Ta)C, (Ti,Ta)C ,
(W,Ti,Ta)C, (W,Ti,Ta.Nb)C,(W,Ti,Ta,Cr)C.
3. Ti (C,N) based cermet rods/ inserts/blanks; (suitable for drilling and
cutting tools, ,CNC tools, printed circuit board, drilling milling
turning threading turning tools etc.Sinter-HIP process.)
4. WC-CO tile cutting wheel.
5.planetary ball mill |
| contact us: |
Contact us:
mobile:86-15974242234
|
FAQ
1.What size do you need? Since we have 60-325mesh,
a.0.8um: normally used as additives in carbide, cutting tools,etc. (additive amount:0.1%~2%)
b.60-325mesh: mixed with other materials normally used in spraying coating, which have strict
requirement in particle size and its mixture evenness.
c.3~5um:normally used in alloy products.
2.our test methods are as follows:
a.FSSS Fisher Sub-sieve sizer b.Laser c.SEM d.Seizing e.apparent density of powders
3.Delievery time:about 7 days for carbide powder.
Contact us:
mobile:86-15974242234
|
|
|
|
Product Image
|
